BNLMM - OLEIC ACID, 0224

  • MSDS: BNLMM
  • Manufacturer: J T BAKER INC
  • Product Name: OLEIC ACID, 0224
  • National Stock Number: 6810-00N027135
Product Identification

Product ID:OLEIC ACID, 0224
MSDS Date:05/01/1989
FSC:6810
NIIN:00N027135
MSDS Number: BNLMM

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865
US

Emergency Phone: 201-859-2151;800-424-9300(CHEMTREC)

Info Phone: 800-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

(OLEIC ACID)

CAS: 112-80-1

RTECS: RG2275000

Fraction By Weight: 90-100%

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RT) 74 G/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

First Aid

First Aid:INGEST: IF PERS IS CONSCIOUS, IMMED GIVE LARGE AMOUNTS OF
WATER. GET MED ATTN. INHAL: MOVE THE EXPOSED PERS TO FRESH AIR.
SKIN: IMMED WASH SKIN WITH PLENTY OF SOAP AND WATER FOR AT LEAST 15
MINUTES. E YES: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.

Fire Fighting

Flash Point Method:CC
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. TAKE UP
WITH SAND OR OTHER NON-COMBUSTIBLE ABSORBENT MATERIAL AND PLACE
INTO CONTAINER FOR LATER DISPOSAL. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA.
Other Precautions:PRODUCT MAY SOLIDIFY AT ROOM TEMPERATURE. DURING USE
AVOID CONTACT WITH EYES, SKIN, CLOTHING. WASH THOROUGHLY AFTER
HANDLING.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE NIOSH/MSHA
APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
VAPOR AND MIST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNIFORM & APRON ARE RECOMMENDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:42.0F,5.6C
Vapor Pres:9.4
Spec Gravity:0.89
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:CLEAR, LIGHT YELLOW VISCOUS LIQUID.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALUMINUM.
Stability Condition to Avoid:HEAT, LIGHT.
Hazardous Decomposition Products:CO, CO2.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.